galyndavis wrote:
Hi everyone,
I am winding down on my 120 volt version of the preamp.
question:
there are two 2 terminal stand offs one has a one meg resistor across the 2 teminals on the left bottom of the drawing. there is also a jumper across them......what good does the resistor do if the signal can just bypass the resistor on the jumper.????
You mean the one with R2? That is the input jack. It has 4 terminals, not just 2.
galyndavis wrote:
the other 2 terminal stand off is at the bass pot and goes to c9.....it looks like on one of the drawings it may be a shielded ground from a small coax.....dunno.....I dont understand this stand off either ...the one on the bass pot.....it appears as there is no connection from on terminal to the other....on the left it goes to the bass pot on the right it goes to c9/......i assume these are just connected here.......
Thats the output jack. Again, it's a 4 terminal. The thick black wire is the earth bus.
